Fiber is often used for printing and dyeing treatment, but many fibers are polymer materials. In order to ensure its effect, in order to prevent the fiber from fading after printing and dyeing, the current fluent solution is to use plasma treatment, which can improve the hydrophilicity of the fiber.

Customers often bring toy samples to the company, such as some small dinosaurs, small frogs and other accessories that need to be glued and printed, and ask how plasma can improve the effect.Toys are usually produced by injection molding in blocks, then glued and spliced together to form a toy, but

KQ gluing system &cold glue systems have already experienced more than 10 years ,It divides of high pressure electronic gun,M-pressure gun,mist gun, multiple guns ,pneumatic gun multiple -hole gun of cold glue system etc All of cold glue guns ,installed on folder gluer machine ,assembly machine,pa

Plasma surface treatment machine, plasma etching technology1. Folder-gluer plasma polishing processor systemThe use of conventional water-based cold glue can make the laminated or glazing cardboard be reliably bonded on the folder gluer. There is no need for partial laminating, partial glazing, surf

If many low-end materials have poor adhesion and low processing requirements, they are likely to be treated with flame. Although this method is primitive, it is effective. But not all materials can be treated with flames. Many materials are not resistant to high temperatures. Burning with fire will